1-866-420-Door (3667)

Roll-Up Doors Models 150, 155, & 160

Roll-Ups Base Pricing

MODEL 150 Self Storage Door
Yard Barns
Mini-Warehouses
Storage Sheds
Boat Houses
Other Light-Duty Applications

The Model 150 self storage door is a leader for value and functionality. Listed are just some of the reasons why:
Tubular 1-5/16” live shaft axle.
26-gauge, hot-dipped galvanized steel curtain provides rust-resistance.
18-gauge, hot-dipped steel guides for strength and rust protection.
Self-lubricating polypropylene wearstrips on outside of curtain prevent metal-to-metal contact.
Factory installed exterior mini-lock has provisions for two padlocks for added security.
Heavy-duty bottom bar withstands external elements.
Full bulb-type bottom weatherstrip ensures proper fit along irregular floors.

Minimum Backroom Required
No horizontal track. Door rolls up above doorway.

Low Maintenance
Heavy-duty, hot-dipped galvanized steel construction with a finish paint system provides years of low-maintenance operation.

Baked-On Polyester Paint
18 baked-on polyester finishes complement any building.
Click here to view the Color Options.

Model 155 Medium-Duty Door
Trucking Terminals
Post Frame Buildings
Small Industrial Storage
Job Site Trailers






Model 160 Heavy-Duty Door
Trucking Terminals
Post Frame Buildings
Light Industrial Warehousing and Storage
Job Site Trailers
Farm Machinery Storage Sheds

General Specifications for Model 155 & 160 Roll-Up Doors

Curtain
.019” (26-guage) hot-dipped galvanized steel roll formed into a corrugated sheet, interlocked and seamed together to make a continuous curtain for full height of door.

Polypropylene Strip
A 1” wide strip, stapled along the exterior edges of the curtain, acts as a wearstrip and prevents steel-to-steel contact between the curtain and guide, allowing for longevity and quiet operation. Model 155 has a strip attached to exterior side of curtain only. Model 160 has a strip attached to both exterior and interior sides of curtain.

Finish Coat
Prior to roll forming, curtain is pretreated, then painted with a prime coat and a top coat of medium gloss, high temperature polyester paint. Choice of 18 standard colors.

Bottom Bar
Extruded aluminum, reinforced with a galvanized steel angle and equipped with a vinyl, bulb-type weather-stripping.

Counterbalance
Springs are factory-lubricated, helical wound torsion-type made from oil-tempered wire and factory-calibrated to match site specifications.

Brackets
Of structural steel angles and flat bar steel welded together to form a solid triangular support bracket.

Guides
Made of galvanized steel with a polypropylene strip attached to inside edge, to act as a wearstrip and to prevent steel-to-steel contact between the curtain and guide allowing for longevity and quiet operation. Model 155 is 18-gauge steel; Model 160 is 16-gauge steel.

Operation
Standard operation of doors as follows: Up to 10’0” x 10’0” by means of push up operation. Over 10’0” x 10’0” by means of 4:1 reduce chain hoist drive.

Operator Recommendations
The Lift-Master Model MJ and EJ, Medium-Duty Jackshaft Operator, is recommended for the Model 155. The Lift-Master Model HJ and J, Heavy-Duty Jackshaft Operator, is recommended for the Model 160.

Click here to view the Install It Yourself guide.